FLOAT V2 DUAL FILTER
Better together, 15% off.
Get Iota and Float V2 together through Nov 10 and save 15%.
Expression Ramper allows you to pick two expression settings (A and B) and move between them, either in one motion or as a continuous LFO activated by a footswitch. The mini enclosure size takes up minimal space while creating new sounds out of any pedal with an expression input.
Controls include:
Shape toggle to determine LFO motion (triangle, square, or one-shot)
Alternate wave shapes accessible via Tap switch (smooth random, sharp random, or one-shot random)
Assignable knob to set A position, B position, and LFO Rate
Tap switch to set rate via tap tempo
Footswitch to set expression output in motion, with momentary or latching operation
Internal configuration for TRS, TRS reverse polarity, and TS configurations, as well as ability to replace built-in 50K digipot with 10K or 100K versions
For more information, see the Expression Ramper manual available here.
Requires 9V DC center negative 2.1mm jack power supply capable of 50mA (not included).
Dimensions: 2” (width) x 3.75” (height) x 2” (depth).
The art of Expression Ramper HK is by Holey Kids.
Float is a pair of state variable analog filters. Each filter has a full control set, allowing things like filter type, envelope sensitivity, and LFO rate, depth, and shape to be set by the player to craft their ideal filter, whether static or in motion. Where Float really comes alive is with both filters engaged: parallel strangeness, series intensity, synced stereo modulations, or even a simple fully stereo analog filter where you set the cutoff with an expression pedal. Use it with guitars, synths, basses: whatever you want to filter!
Float V2 has:
True bypass switching
Presets
Expression control over every knob
MIDI control over everything in the pedal
Four routing modes: mono parallel, mono series, mono in stereo out, and true stereo
A sync switch to link the motion of the two filters or set them to the same cutoff point
Aux footswitch for tap tempo or preset switching
Controls for each side include:
Cutoff to set the central cutoff frequency
Rate, Depth and Shape to set the speed, range, and shape of an LFO that moves the cutoff around
Sensitivity to use your signal strength to manipulate the Cutoff or Rate settings
Filter Type, Resonance, and Volume to shape the character of the filter
Footswitch to engage or disengage the filter
For more information, see the Float V2 manual available here.
Requires 9V DC center negative 2.1mm jack power supply capable of 350mA (not included).
The art of Float V2 is by Daniel Sutliff.