Fault V2 Overdrive + Distortion
Inspired by pedals inspired by a mythical circuit, Fault is an overdrive pedal that ranges from boost to distortion with ample control over voicing. A wide control set can make this the only gain pedal on your board, though of course it loves to stack as well.
Controls include
Vol, Gain 1, and Voice to set the sound of the primary overdrive
Boost toggle to set the range and voice of Gain 1
Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed
Three band EQ where Low, Mid, and High control the post-drive voice of the pedal
Crush toggle to add additional clipping at the very last stage in the circuit
Soft-touch bypass footswitch for true bypass and minimal switch noise
For more information, see the Fault manual available here.
Requires 9V DC center negative 2.1mm jack power supply capable of 60mA (not included).
The art of Fault is by Evan M Cohen.
Inspired by pedals inspired by a mythical circuit, Fault is an overdrive pedal that ranges from boost to distortion with ample control over voicing. A wide control set can make this the only gain pedal on your board, though of course it loves to stack as well.
Controls include
Vol, Gain 1, and Voice to set the sound of the primary overdrive
Boost toggle to set the range and voice of Gain 1
Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed
Three band EQ where Low, Mid, and High control the post-drive voice of the pedal
Crush toggle to add additional clipping at the very last stage in the circuit
Soft-touch bypass footswitch for true bypass and minimal switch noise
For more information, see the Fault manual available here.
Requires 9V DC center negative 2.1mm jack power supply capable of 60mA (not included).
The art of Fault is by Evan M Cohen.
Inspired by pedals inspired by a mythical circuit, Fault is an overdrive pedal that ranges from boost to distortion with ample control over voicing. A wide control set can make this the only gain pedal on your board, though of course it loves to stack as well.
Controls include
Vol, Gain 1, and Voice to set the sound of the primary overdrive
Boost toggle to set the range and voice of Gain 1
Gain 2 to introduce additional gain when the Gain 2 footswitch is pressed
Three band EQ where Low, Mid, and High control the post-drive voice of the pedal
Crush toggle to add additional clipping at the very last stage in the circuit
Soft-touch bypass footswitch for true bypass and minimal switch noise
For more information, see the Fault manual available here.
Requires 9V DC center negative 2.1mm jack power supply capable of 60mA (not included).
The art of Fault is by Evan M Cohen.
